Ferrari F8 Spider – Scuderia Audio

F8 Lo-Fi Plug and Play Stealth Amplifier Package

admin — Mon, 17 Feb 2025 20:29:51 +0000

Unlike the 458 and 488 models, there is enough room to install this monster 700 Watt digital signal processing amplifier behind the glovebox in the Tributo and F8 Spider models. This kit gives you everything you need to add this amp to any Lo-Fi F8’s without cutting any factory wires. This is 90% plug and play. That is, connect the power cable to the positive post on the battery, connect the ground cable to the chassis and connect one small wire to the accessory circuit and you are good to go.

FOR F8 Lo-Fi CARS ONLY. (If you’re not sure what you need, call)

458/488/F8 Utopia Carbon Fiber Component Speakers Upgrade

admin — Tue, 14 Jan 2025 01:24:12 +0000

The Focal Utopia speaker line is unilaterally regarded as the best car stereo component speakers on the planet.
If you want the absolute best, this is the system. Absolutely no cutting or drilling required.
This upgrade includes the following:
– Focal Utopia 6 1/2″ 6WM Midrange Drivers
– 3D Printed Midrange Adapter Plates for Utopia Drivers
– Focal Utopia Beryllium Tweeters
– 3D Printed Tweeter Pods for Utopia Beryllium Tweeters overlayed with genuine matching carbon fiber.
– Focal Utopia Biampable Passive Crossovers
You can’t get any better sound than this.

458/488/F8 Utopia Component Speakers Upgrade

admin — Mon, 23 Dec 2024 08:38:40 +0000

The Focal Utopia speaker line is unilaterally regarded as the best car stereo component speakers on the planet.
If you want the absolute best, this is the system. Absolutely no cutting or drilling required.
This upgrade includes the following:
– Focal Utopia 6 1/2″ 6WM Midrange Drivers
– 3D Printed Midrange Adapter Plates for Utopia Drivers
– Focal Utopia Beryllium Tweeters
– 3D Printed Tweeter Pods for Utopia Beryllium Tweeters
– Focal Utopia Biampable Passive Crossovers
You can’t get any better sound than this.

Cargo Net Support Bracket

admin — Sat, 10 Feb 2024 02:39:46 +0000

The stock support bracket that holds the cargo net to the center of the firewall is extremely thin and breaks easily. The trouble is, you cannot purchase a replacement support by itself. You must buy the entire firewall cover, which includes the cargo net and the support bracket (cost: around $1,600.00). Scuderia Audio is offering 3D printed replicas of the bracket made from solid nylon. These pieces are an additional 1.5 millimeters thicker than stock and are very sturdy. This piece has the same subtle curves and countersunk mounting holes as the original.

Note: Does not include OEM bolts and washers, bracket only.

488/F8 Spider Subwoofer

admin — Thu, 18 Jan 2024 21:13:20 +0000

Scuderia Audio offers custom designed/CNC manufactured subwoofer systems for the 488 and F8 Spider. The JL Audio 8W1V3’s new design results in crisp, clean, tight and accurate bass. With 300 Watts or more, the bass will definitely move your hair.
100 Seat Clearance. No center console door interference.
Includes CNC machined enclosure, OEM Ferrari leather, stitching, subwoofer, internal acoustical dampening material, speaker wire and all mounting hardware.

Late Model Hi-Fi OEM Style Door Speaker Connector Kit

admin — Sat, 30 Dec 2023 19:46:30 +0000

The connectors on the OEM door speakers for late model Ferraris (458/488/F8/California/California T/599/FF/F12/612/812/Roma/Portofino) with the JBL premium stereo option do not exist as standalone units. They are integrated into the speaker itself and cannot be separated. Folks who wanted to install aftermarket door speakers had no choice but to cut the connectors off of the stock stereo harness, until now.
Scuderia Audio presents OEM style door speaker connectors. Made from 3D printed, high impact nylon and brass electrical pins, these connectors eliminate the need to cut the stock connector off of the door speaker wires. Simply plug and stock connector into this new connector and connect the new short wires from the new connector to the new speaker.
Includes:
2 OEM Style Connectors
2 sets of JL Audio 16 gage speaker wire
6 1/4″ fully insulated female spade lug crimp connectors
2 3/8″ fully insulated female spade lug crimp connectors
Copy/paste this YouTube link into your browser to watch a short demonstration video: https://www.youtube.com/shorts/qwQMS-ovMzc

Late Model Lo-Fi OEM Style Door Speaker Connector Kit

admin — Sat, 30 Dec 2023 19:41:31 +0000

The connectors on the OEM door speakers for late model Ferraris (458/488/F8/California/California T/599/FF/F12/612/812/Roma/Portofino) without the JBL premium stereo option do not exist as standalone units. They are integrated into the speaker itself and cannot be separated. Folks who wanted to install aftermarket door speakers had no choice but to cut the connectors off of the stock stereo harness, until now.
Scuderia Audio presents OEM style door speaker connectors. Made from 3D printed, high impact nylon and brass electrical pins, these connectors eliminate the need to cut the stock connector off of the door speaker wires. Simply plug and stock connector into this new connector and connect the new short wires from the new connector to the new speaker.
Includes:
2 OEM Style Connectors
2 sets of JL Audio 16 gage speaker wire
6 1/4″ fully insulated female spade lug crimp connectors
2 3/8″ fully insulated female spade lug crimp connectors
Be sure to watch the short demonstration video by clicking on the Video tab.

3D Printed Premium Midrange Adapters for DynAudio

admin — Wed, 19 Jul 2023 18:04:56 +0000

Scuderia Audio presents AutoCAD designed, 3D printed midrange adapter fixtures for your late model Ferrari.
These fixtures are engineered from high impact nylon and offer distinct advantages over the stainless steel adapter plates:
– Positions the speaker closer to the door panel for better imaging and increased sound pressure.
– A tube shaped design behind the speaker for increased mid bass.
– An umbrella built into the design to protect the back of the speaker from moisture (car washes, rain, etc.).
Specifically designed for the high end DynAudio Esotar2 midrange drivers.
Includes all mounting hardware.
Better mid bass and better sound, guaranteed.

*** NO RETURNS ON THIS ITEM ***

Note: Does not include speakers.

Superbass Upgrade

admin — Sun, 02 Apr 2023 20:15:25 +0000

This upgrade is for anyone who already has a Scuderia Audio subwoofer system but wants more bass.
Swap out your existing JL Audio 8W1 subwoofer with a monster 250 Watt JL Audio 8W3 sub.
This five-minute swap includes new JL Audio 8W3 subwoofer, Auto CAD designed, precision 3D printed solid nylon spacer, 8 case hardened machine bolts for assembly.

F8 Carbon Fiber Component Speakers Upgrade

admin — Mon, 23 Aug 2021 20:34:02 +0000

Scuderia Audio presents a component speakers upgrade kit for your Ferrari F8 Tributo or F8 Spider. Absolutely no cutting or drilling required.
This upgrade includes the following:
– Focal Flax Series 6 1/2″ Midrange Speakers
– 3D Printed Midrange Adapter Plates for Ferrari F8
– Focal Tweeters
– 3D Printed Carbon Fiber Skinned Tweeter Pods for Ferrari F8
– Focal Passive Crossovers
Improve the overall sound of your Ferrari F8 car audio system, guaranteed.