Ferrari Roma – Scuderia Audio

Roma Premium Lo-Fi Component System

admin — Mon, 23 Dec 2024 09:11:38 +0000

Scuderia Audio presents a complete premium component speakers upgrade kit for your Ferrari Roma.
Absolutely no cutting or drilling required.
This upgrade includes the following:
– Focal ES165KE “K2 Power” 6 1/2″ midrange drivers.
– 3D printed midrange adapters lined with genuine DynaLiner
– K2 Tweeters
– Laser cut stainless steel tweeter adapters
– Focal “Flax Series” rear midrange
– OEM style electrical connectors for midrange drivers
Improve the overall sound of your Ferrari Roma, guaranteed.

NOTE: Not recommended for Hi-Fi Roma. Call for details.

Roma/296/SF90 add an amplifier harness

admin — Mon, 09 Sep 2024 01:04:29 +0000

Scuderia Audio presents an “add an amplifier” harness for your Lo-Fi SF90 Stradale, Ferrari Roma or Ferrari 296 GTB/GTS.
This harness separates the speaker wires so you can add a dedicated amplifier without cutting any wires.

NOTE: Not recommended for Hi-Fi optioned cars (JBL Premium Stereo).

Late Model Hi-Fi OEM Style Door Speaker Connector Kit

admin — Sat, 30 Dec 2023 19:46:30 +0000

The connectors on the OEM door speakers for late model Ferraris (458/488/F8/California/California T/599/FF/F12/612/812/Roma/Portofino) with the JBL premium stereo option do not exist as standalone units. They are integrated into the speaker itself and cannot be separated. Folks who wanted to install aftermarket door speakers had no choice but to cut the connectors off of the stock stereo harness, until now.
Scuderia Audio presents OEM style door speaker connectors. Made from 3D printed, high impact nylon and brass electrical pins, these connectors eliminate the need to cut the stock connector off of the door speaker wires. Simply plug and stock connector into this new connector and connect the new short wires from the new connector to the new speaker.
Includes:
2 OEM Style Connectors
2 sets of JL Audio 16 gage speaker wire
6 1/4″ fully insulated female spade lug crimp connectors
2 3/8″ fully insulated female spade lug crimp connectors
Copy/paste this YouTube link into your browser to watch a short demonstration video: https://www.youtube.com/shorts/qwQMS-ovMzc

Late Model Lo-Fi OEM Style Door Speaker Connector Kit

admin — Sat, 30 Dec 2023 19:41:31 +0000

The connectors on the OEM door speakers for late model Ferraris (458/488/F8/California/California T/599/FF/F12/612/812/Roma/Portofino) without the JBL premium stereo option do not exist as standalone units. They are integrated into the speaker itself and cannot be separated. Folks who wanted to install aftermarket door speakers had no choice but to cut the connectors off of the stock stereo harness, until now.
Scuderia Audio presents OEM style door speaker connectors. Made from 3D printed, high impact nylon and brass electrical pins, these connectors eliminate the need to cut the stock connector off of the door speaker wires. Simply plug and stock connector into this new connector and connect the new short wires from the new connector to the new speaker.
Includes:
2 OEM Style Connectors
2 sets of JL Audio 16 gage speaker wire
6 1/4″ fully insulated female spade lug crimp connectors
2 3/8″ fully insulated female spade lug crimp connectors
Be sure to watch the short demonstration video by clicking on the Video tab.

3D Printed Premium Midrange Adapters for DynAudio

admin — Wed, 19 Jul 2023 18:04:56 +0000

Scuderia Audio presents AutoCAD designed, 3D printed midrange adapter fixtures for your late model Ferrari.
These fixtures are engineered from high impact nylon and offer distinct advantages over the stainless steel adapter plates:
– Positions the speaker closer to the door panel for better imaging and increased sound pressure.
– A tube shaped design behind the speaker for increased mid bass.
– An umbrella built into the design to protect the back of the speaker from moisture (car washes, rain, etc.).
Specifically designed for the high end DynAudio Esotar2 midrange drivers.
Includes all mounting hardware.
Better mid bass and better sound, guaranteed.

*** NO RETURNS ON THIS ITEM ***

Note: Does not include speakers.

3D Printed Premium Midrange Adapters

admin — Fri, 23 Jul 2021 04:00:47 +0000

Scuderia Audio presents AutoCAD designed, 3D printed midrange adapter fixtures for your late model Ferrari.
These fixtures are engineered from high impact nylon and offer distinct advantages over the stainless steel adapter plates:
– Positions the speaker closer to the door panel for better imaging and increased sound pressure.
– A tube shaped design behind the speaker for increased mid bass.
– An umbrella built into the design to protect the back of the speaker from moisture (car washes, rain, etc.).
Includes all mounting hardware.
Better mid bass and better sound, guaranteed.

*** NO RETURNS ON THIS ITEM ***

Note: Does not include speakers.